Currencies:


Shopping Cart

now in your cart 0 items



All Products



2.4 GHz, 802.15.4 Radio Peripheral


2.4 GHz, 802.15.4 Radio Peripheral



Manufacturer: FreakLabs
Price: $30.00
Contact Us



The FL-AT86RF230-DEV is a radio peripheral board with a universal serial connector that enables the FreakLabs rapid prototyping platform to communicate wirelessly with other devices. It’s based on the Atmel AT86RF230 wireless IC and conforms to the IEEE 802.15.4 protocol. The chip is designed specifically for low power wireless communications and is commonly used in wireless sensor networking. It features a high receive sensitivity and +3dBm (2 mW) transmit power. The board has two antenna options: an on-board antenna and an RP-SMA, RF connector for an external antenna. The default option is the RP-SMA external antenna connector. This provides the most flexibility because even without an

3-Axis +/-16g Accelerometer Board


3-Axis +/-16g Accelerometer Board



Price: $20.00
Contact Us



The FreakLabs FL-ADXL345-DEV accelerometer board is a rapid prototyping sensor board designed to quickly evaluate and test applications that require an accelerometer. The board uses an ADXL345 3-axis accelerometer with a high sensitivity and +/-16g maximum measurement capability. The board also contains a FreakLabs universal serial peripheral connector so that it can be seamlessly integrated into any FreakLabs MCU development board. The ADXL345 was chosen because of some very nice features. One of the main features is a digital interface using either I2C or SPI bus. Previous versions of the Analog Devices 3-axis accelerometer MEMS sensors had three separate analog outputs and required three

900 MHz +2dBi Dipole Antenna, RP-SMA


900 MHz +2dBi Dipole Antenna, RP-SMA



Price: $4.00
Contact Us



This is a 2 dBi omni-directional 900 MHz dipole antenna with an RP-SMA plug. Omni-directional antennas radiate equally well in all directions and are best used to spread a signal uniformly over some area. Unlike a directional or semi-directional antenna, an ideal omni-directional antenna does not favor any direction in particular. For a general purpose application, omni-directional antennas are usually the antenna of choice and directional or semi-directional antennas are used when the application and node locations are well defined. The dBi rating of an antenna specifies the amount of gain the antenna has in a particular direction. An antenna gain of 0dBi specifies an antenna that radiates

Your cart is empty.