Currencies:


Shopping Cart

now in your cart 0 items



All Products



900 MHz, 802.15.4 Radio Peripheral


900 MHz, 802.15.4 Radio Peripheral



Price: $30.00
Contact Us



This is the AT86RF212 900 MHz radio peripheral v1.1 for the FreakLabs WSN rapid prototyping MCU boards. It supports the license-free 915 MHz North American band, 868 MHz European band, and the 780 MHz Chinese band. It's supported by the Chibi software stack and the default band can be set in the stack. 900 MHz radios are often preferable to 2.4 GHz radios because there is less crowding in the frequency band and lower frequencies suffer less path loss and attenuation. Hence the range will be greater for the same amount of power between a 900 MHz radio and 2.4 GHz radio. This board has a FreakLabs universal serial connector that can connect to any FreakLabs MCU board and also comes with

900 MHz, 802.15.4, High Power Radio Peripheral


900 MHz, 802.15.4, High Power Radio Peripheral



Price: $45.00
Contact Us



The FreakLabs FL-AT86RF212-CC1190-DEV 900 MHz modular radio board is designed to be an easy way to rapidly prototype and evaluate usage of high powered radios for wireless sensor networks. It comes with the Atmel AT86RF212 900 MHz radio which conforms to the IEEE 802.15.4 wireless protocol. It also sports a high power front end transmit amplifier and low noise receive amplifier to improve the communications range of the radio. This board was originally designed to evaluate high power radios for research work in environmental monitoring applications. In a remote location, a wireless sensor network often consists of a localized sensor network to collect data and a long distance link to a

AA Dual Battery Holder


AA Dual Battery Holder



Price: $1.50
Contact Us



This is a dual AA battery holder. It can hold two AA-sized batteries in a series configuration. For AA alkaline batteries, the nominal output voltage would be 3V. This can also hold nickel-metal-hydride (NiMH) batteries in the AA size. If NiMH batteries are inserted, the nominal output voltage will be 2.4V. This can also hold lithium-ion batteries in the 14500 form factor. If lithium-ion batteries are inserted, the nominal output voltage will be 7.4V. These battery cases come with a JST XH 2.54mm connector attached.

Your cart is empty.